PHH150 5446
Features
| Power (tons) | 150 |
| Stroke (mm) | 400 |
| Lower plate (mm) | 1500x500 |
| Upper plate (mm) | 450x400 |
| Throat depth (mm) | 265 |
| Maximum oppening (mm) | 700 |
| Engine power (HP) | 5,5 |
| Approximation speed (mm/sec) | 10 |
| Work speed (mm/sec) | 2,4 |
| Max. pressure (Bar) | 300 |
| Height (mm.) | 1650 |
| Width (mm.) | 2910 |
| Depth (mm.) | 1500 |
| Weight (Kg.) | 5700 |
PHH200 4924
Features
| Power (tons) | 200 |
| Stroke (mm) | 400 |
| Lower plate (mm) | 1800x500 |
| Upper plate (mm) | 450x400 |
| Maximum oppening (mm) | 800 |
| Engine power (HP) | 5,5 |
| Approximation speed (mm/sec) | 10 |
| Work speed (mm/sec) | 2,4 |
| Max. pressure (Bar) | 315 |
| Machine dimensions (m) | 2,90x1,80x1,55 |
| Weight (Kg.) | 7000 |
PHH250 4450
Features
| Power (tons) | 250 |
| Stroke (mm) | 500 |
| Lower plate (mm) | 1800x500 |
| Upper plate (mm) | 400x400 |
| Maximum oppening (mm) | 1000 |
| Engine power (HP) | 7,5 |
| Approximation speed (mm/sec) | 10 |
| Work speed (mm/sec) | 2,3 |
| Max. pressure (Bar) | 315 |
| Machine dimensions (m) | 1,80x3,30x1,55 |
| Weight (Kg.) | 9000 |
PHH250 4273
Features
| Power (tons) | 250 |
| Stroke (mm) | 500 |
| Lower plate (mm) | 2500x500 |
| Upper plate (mm) | 400x300 |
| Maximum oppening (mm) | 900 |
| Engine power (HP) | 7,5 |
| Speed mm/min. | 600 / 140 |
| Machine dimensions (m) | 2,94x2,50 |
| Weight (Kg.) | 8500 |
PHH180 3988
- Power of the machine 180 Tons.
- Lower plate 3.000 x 600 mm with “T” grooves M16.
- Upper plate 600 x 300 mm with “T” grooves M16.
- Upper plate guided by means of 2 cylindrical columns Ø40 with bronze sleeves.
- Maximum opening between plates: 850 mm.
- Stroke of the cylinde: 400 mm.
- Hydraulic group with 2 speeds, approximation and work with automatic speed change by pressure or position.
- Approximation speed: 10 mm/sec.
- Work speed: 3 mm/sec.
- Engine power 7,5 Hp (5,5 Kw).
- Pressure regulator.
- Activation of the machine by means of manual distributor with 3 positions.
Features
PHH-300
- The press MECAMAQ type PHH-300, It has been designed specially for the suitable one or shaped of profiles for companies of structures.
- It has a power of 300 Tm, with 1 cylinder of double effect, with course of 300 mm adjustably both of ends of stops and in pressure.
- The desk is of 2.000 x 700 mm with grooves "T".
- Hydraulic group of 2 speeds 600/115 mm x minute.
- Power of the engine: 7,5 Hp.
- Operation in manual and automatic.
Features
PHH-250
- Press for straightening sections
- 250 Tn power
- 1.800 x 500 mm support bench
- 600 mm opening between benches
- 250 mm cylinder course
- Course control via end of track
- 7,5 Hp engine power
- Weight: 8.000 Kg approx
Features
PHH-50
- Inyection Molding Press.
- 50 tons capacity.
- Plates dimensions: 800 x 1000 mm, 4 track slide guidance front plate.
- 1000 mm opening between plates.
- 750 mm upper plate slide.
- Two-speed hydraulic power pack, slow / fast selector.
- Photo-electric safety guards CAT 4, front side protection.
- Machine weight: 3.350 Kg / 3.5 tons.
Features
